Frequently Answered Questions
No question goes unanswered.
Wheel Machining and Hardware
Unlike some other wheels on the market, Classic centers cannot be changed from standard (face) mount, to front register (reverse) mount. The machining process between the two parts is noticeable different.
No, each center is specifically machined to utilize the hardware in which they were originally built with. Use of any hardware other than what the wheels were initially supplied with, can alter the wheels structure and strength. Doing so will void any manufacturer warranty.
The finish on your wheels, should be treated the same as the finish on your car. A mild dish or car wash soap is plenty enough to remove the dirt and grime accumulated from normal driving. Use extreme caution if using any commercially available wheel cleaners, as many are acid or lye based which will ruin the finish on your wheels. We suggest staying away from wheel cleaners all together as a general rule of thumb.
For further cleaning and wheel care, click here.