Drag Strip Ready: Silver Chevrolet C6 ZR1 Corvette On WELD Alumastar & WELD S71 Wheels

WELD Alumastar and WELD S71, alongside sticky drag radial tires, make for a perfect combination for improved traction on the racetrack

Giving your car the best odds on the drag strip is a combination of power & prowess. However, if your wheel and tire setup aren’t matched properly to the car’s power levels, you’ll be hard-pressed to find sufficient traction on the rubber strip. Luckily, going with a WELD Wheels solution for a vehicle like this silver Chevrolet C6 ZR1 is a great way to improve your odds & traction on the drag strip.

This ZR1 is equipped with a set of WELD Alumastar wheels in the front and WELD S71 wheels in the rear. The wheels are installed in sizes of 17×4.5 for the front and 17×10 in the rear. Both the front & rear wheels come equipped with drag radial tires. In the front, a set of M&H front runner tires, sized 4.5/26.0/17 is installed, while the rear features a set of Hoosier drag radial tires, sized 335/35/17. In turn, this application gives the racer behind the wheel of this Corvette C6 ZR1 some impressive traction of the line.

Silver Chevrolet C6 ZR1 Corvette - WELD S71 & WELD Alumastar Wheels

You can grab a detailed view of this silver Chevrolet Corvette C6 ZR1 in the media gallery right below. Both the Alumastar front runners and S71 rear wheels are available for purchase from our website. However, if you’re not fully sure about the wheel setup & sizes needed for your vehicle, please don’t hesitate to contact us for more information right away.

12

Black 2014 Chevrolet Camaro SS Equipped With WELD S79 Beadlock Wheels

This Camaro SS features 700+ horsepower, WELD S79 wheels and Mickey Thompson tires, making it ready for the drag strip

This highly tuned 2014 Chevrolet Camaro SS comes from Ernie Francis Jr, a well-known race car driver. Ernie is a 6x Trans Am Champion and a NASCAR Diversity driver. And from what it looks like, a performance tuning nut. This particular BPR700 Camaro comes with over 700-horsepower and features a clean black exterior finish, topped off with a set of WELD S79 and WELD S79 Beadlock three-piece forged wheels. In turn, this Camaro SS is more than capable of duking it out with the rest of the pack on the drag strip.

Black 2014 Chevrolet Camaro SS - WELD S79 Forged Wheels

In its stock form. the Camaro SS is powered by a 6.2L LT1 V8 delivering of 455 horsepower and 455 lb-ft of torque. It will accelerate from 0 to 60 in 4.0 seconds flat, thanks to the 8-speed automatic gearbox installed in this vehicle. With Direct Injection, Variable Valve Timing and, on the 8-speed automatic, Active Fuel ManagementTM, it offers efficiency when you want it, power when you need it, thus saving a lot of fuel. Well, not that you need all of this on the racetrack. For most, thanks to a supercharger and some additional engine tuning, this vehicle can deliver way north of the stock rated 455 horsepower. Furthermore, the vehicle was always envisioned as a track vehicle, making it a sturdy American muscle car that can take the beating both on and off the racetrack. Naturally, you will void your warranty if you tune it, but most of our customers don’t really care about that. Overall, if you throw in a set of WELD S79 wheels, Mickey Thompson drag radial tires and bump up the horsepower like this owner, you got a really good chance of giving most drivers on the drag strip a run for their money. And that’s what this is all about.

Please grab a detailed look at the media gallery of this 2014 Chevrolet Camaro SS with WELD S79 Beadlock wheels right below. The wheels are available for ordering through our website. However, if you require any further information about our wheels, please don’t hesitate to contact us right away. Our sales team will provide you with all the necessary information you may need and help you order the utmost perfect-fitting set of brand new WELD wheels for your vehicle.

Powder Blue 1969 Ford F100 Pick Up Truck Gets WELD S71 Forged Wheels

Perfectly restored, this Powder Blue 1969 Ford F100 pick up truck sits nicely on a set of WELD S71 three-piece forged wheels

The fifth generation of the Ford F-Series is a line of pickup trucks produced by the U.S. carmaker from 1967 to 1972 model years. While the fifth-generation was built on the same platform as the fourth generation F-series trucks, the fifth generation had sharper styling lines, a larger cab and greenhouse, and expanded engine options. Lately, these vintage trucks have been the focal point of restoration and aftermarket builds for a few of our customers. And judging by the looks of this gorgeous Powder Blue 1969 Ford F100 pick up truck, these guys definitely picked the right truck for some modding work.

This particular Ford F100 pick up truck comes equipped with a set of WELD S71 three-piece forged wheels. Thanks to their five-spoke design and a deep-dish configuration, these forged wheels fit a build like this perfectly. For this particular build, the wheels come in a Gloss Black and Polished Aluminum finish for the wheel centers and lips, respectively. Furthermore, thanks to a step-lip deep-dish layout, they work perfectly with this restored beauty.

Powder Blue 1969 Ford F100 Pick Up Truck - WELD S71 Forged Wheels

You can grab a more detailed look at this Powder Blue 1969 Ford F100 pick up truck right below. The WELD S71 wheels are available for ordering directly from our website right away. However, if you need any assistance in ordering a set of wheels for your build, don’t hesitate to contact us right away. Our sales team will gladly help you pick out the best fitting set of wheels for your vehicle.